Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Maintenance 8-5
v1.0, May, 2008
The last row of the table is used to display information about the progress of the file transfer.
The page will refresh automatically until the file transfer completes.
Uploading Files
Use the following procedures to upload a file from the switch to a TFTP server.
1. From the File Type field, select the type of file to copy from the switch to the TFTP server.
2. If you are uploading a GS700TR Smart Switch image (Code), select the image on the switch
to upload. If you are uploading another type of file, the Image Name field is not available.
3. Complete the Server Address Type, Server IP Address, and Transfer File Name (full path
without TFTP server IP address) fields.
4. Click the Start File Transfer check box, and then click Apply.
5. Click Cancel to cancel the operation on the screen and reset the data on the screen to the latest
value of the switch.
Download File To Switch (TFTP)
Use the Download File to Switch page to download device software, the image file, the
configuration files and SSL files from a TFTP server to the switch.
You can also download files via HTTP. See “HTTP File Download” on page 8-8 for more
information.
To access the TFTP File Download page:
1. Click Maintenance > Download > TFTP File Download in the navigation tree.
Transfer File Name Enter a destination file name for the file to upload. You may enter up to
32 characters. The factory default is blank.
Start File Transfer To initiate the file upload, check this box before clicking Apply.
Table 8-1. Upload File from Switch Fields (continued)
Field Description