Filter
Top Products
GS700TR Smart Switch Software Administration Manual
8-14 Maintenance
v1.0, May, 2008
2. Click Cancel to cancel the operation on the screen and reset the data on the screen to the latest
value of the switch.
3. Click Apply to initiate the traceroute. The results display in the TraceRoute box.
Figure 8-10
Table 8-7. TraceRoute Fields
Field Definition
Hostname/IP
Address
Enter the IP address or the hostname of the station you want the switch to
discover path for.
Probes Per Hop Enter the number of times each hop should be probed. The valid range is 1 to
10.
MaxTTL Enter the maximum time-to-live for a packet in number of hops. The valid range
is 1 to 255.
InitTTL Enter the initial time-to-live for a packet in number of hops. The valid range is 0
to 255.
MaxFail Enter the maximum number of failures allowed in the session. The valid range is
0 to 255.
Interval Enter the time between probes in seconds. The valid range is 1 to 60.
Port Enter the UDP destination port in probe packets. The valid range is 1 to 65535.
Size Enter the size of probe packets. The valid range is 0 to 65507.
TraceRoute Displays the output from a traceroute.