Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Configuring System Information 2-9
v1.0, May, 2008
5. Click Refresh to refresh the page with the most current data from the switch.
6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
Figure 2-4
Table 2-3. Time Configuration Fields
Field Description
Clock Source Use this field to configure time locally or through SNTP. The default is
Local.
Date Specifies the duration of the box in days, months and years since the
last reboot. This is the default behavior unless you enter a new Date
and Time. The Time and Date will subsequently be changed to match
the Time you entered.
Time Specifies the duration of the box in hours, minutes and seconds since
the last reboot.
Time Zone When using SNTP/NTP time servers to update the switch’s clock, the
time data received from the server is based on Coordinated Universal
Time (UTC), which is the same as Greenwich Mean Time (GMT). This
may not be the time zone in which the switch is located. Time Zone
configures a time zone specifying the number of hours and, optionally,
the number of minutes difference from UTC with Offset Hours and
Offset Minutes. The time zone can affect the display of the current
system time. The default value is UTC.