Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Configuring System Information 2-19
v1.0, May, 2008
2. To create a new DNS server, enter an IP address in standard IPv4 dot notation in the DNS
Server Address and click Add. The server appears in the list below. The precedence is set in
the order created.
3. To remove a DNS server from the list, select the check box next to the item you want to
remove and click Delete. If no DNS server is specified, the check box is global and will delete
all the DNS servers listed.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
5. Click Apply to send the updated configuration to the switch. Configuration changes take
effect immediately.
Host Configuration
Use this page to configure information about DNS servers that the router will use. The order in
which you create them determines their precedence; i.e., DNS requests will go to the higher
precedence server first. If that server is unavailable or does not respond in the configured response
time, then the request goes to the server with the next highest precedence.
To access this page:
1. Click System > Management > DNS > Host Configuration.
Figure 2-11