Filter
Top Products
GS700TR Smart Switch Software Administration Manual
2-20 Configuring System Information
v1.0, May, 2008
2. To create a new DNS server, enter an IP address in standard IPv4 dot notation in the IP
Address field and click Add. The server appears in the list below. The precedence is set in the
order created.
3. To change precedence, you must remove the server(s) by clicking Delete, then add the
server(s) in the preferred order.
DNS Dynamic Host Configuration
Use this page to configure static DNS host names for hosts on the network. The host names are
associated with IP addresses on the network, which are statically assigned to particular hosts.
To access this page:
1. Click System > Management > DNS > Host Configuration.
2. Click Refresh to refresh the page with the most current data from the switch.
3. Click Clear to delete Dynamic Host Entries.
Table 2-10. DNS Host Configuration Fields
Field Description
Host Name Specify the static host name to be added. Its length cannot exceed 158
characters. This field is mandatory for the user.
IP Address To add a new DNS server to the list, enter the DNS server IP address in
numeric notation.
Figure 2-12
Table 2-11. DNS Host Name Mapping Configuration Fields
Field Description
Host Lists the host name you assign to the specified IP address.
Total Total time of the dynamic entry.
Elapsed Elapsed time of the dynamic entry.
Type The type of the dynamic entry.
Addresses Lists the IP address associated with the host name.