Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Configuring System Information 2-21
v1.0, May, 2008
4. Enter a name and click Add, or click Cancel to cancel and redisplay the list.
5. To remove a hostname, select the box and click Delete.
6. If you change any of the settings on the page, click Apply to send the updated configuration to
the switch. Configuration changes take effect immediately.
SNMP V1/V2
The System > SNMP > SNMP V1/V2 folder contains links to the following pages:
• “Community Configuration” on page 2-21
• “Trap Configuration” on page 2-24
• “Trap Flags” on page 2-25
Community Configuration
To display this page, click System > SNMP > SNMP V1/V2 > Community Configuration in the
navigation tree.
By default, two SNMP Communities exist:
• Private, with Read/Write privileges and status set to Enable.
• Public, with Read Only privileges and status set to Enable.
These are well-known communities. Use this page to change the defaults or to add other
communities. Only the communities that you define using this page will have access to the switch
using the SNMPv1 and SNMPv2c protocols. Only those communities with read/write level access
can be used to change the configuration using SNMP.