Filter
Top Products
GS700TR Smart Switch Software Administration Manual
2-46 Configuring System Information
v1.0, May, 2008
2. If you make any changes to the page, click Apply to apply the changes to the system.
BOOTP/DHCP Status
Use the BOOTP/DHCP Status page to display the BOOTP/DHCP Relay status information.
To display the page, click System > Services > DHCP Relay in the navigation tree.
Minimum Wait Time (secs) Enter a time in seconds. This value is compared to the time stamp in the
client's request packets, which should represent the time since the
client was powered up. Packets are only forwarded when the time
stamp exceeds the minimum wait time.
Circuit ID Option Mode Select Enable or Disable from the dropdown menu. If you select
Enable, the relay agent adds Option 82 header packets to the DHCP
Request packets before forwarding them to the server, and strips them
off while forwarding the responses to the client.
Figure 2-31
Table 2-29. BOOTP/DHCP Relay Status Fields
Field Description
Requests Received The total number of BOOTP/DHCP requests received from all clients since
the last time the switch was reset.
Requests Relayed The total number of BOOTP/DHCP requests forwarded to the server since
the last time the switch was reset.
Packets Discarded The total number of BOOTP/DHCP packets discarded by this Relay Agent
since the last time the switch was reset.
Table 2-28. BOOTP/DHCP Relay Agent Configuration Fields (continued)
Field Description