Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Configuring Switching Information 3-5
v1.0, May, 2008
Static LAGs are supported. When a port is added to a LAG as a static member, it neither transmits
nor receives LAGPDUs.
The LAG folder contains links to the following features:
• “LAG Configuration” on page 3-5
• “LAG Membership” on page 3-6
• “LACP Configuration” on page 3-7
• “LACP Port Configuration” on page 3-8
LAG Configuration
Use the LAG (Port Channel) Configuration page to group one or more full duplex Ethernet links to
be aggregated together to form a link aggregation group, which is also known as a port-channel.
The switch treats the LAG as if it were a single link.
To access the LAG Configuration page:
1. Click Switching > LAG > Basic > LAG Configuration in the navigation tree.
Note: The GS700TR switches support a maximum of six LAGs.
Figure 3-3