Filter
Top Products
DG834N RangeMax NEXT Wireless ADSL2+ Modem Router Reference Manual
B-2 Technical Specifications
v1.0, October 2008
Default Configuration
You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset. To perform a hard reset, push and hold the reset button for five
seconds. Your device will return to the factory configuration settings shown in the following table.
Interface Specifications
LAN: 10BASE-T or 100BASE-Tx, RJ-45
WAN: ADSL, Dual RJ-11, pins 2 and 3
T1.413, G.DMT, G.Lite
ITU Annex A [worldwide except Germany] or ITU Annex B
[Germany only]
ITU G.992.5 (ADSL2+)
Feature Default Behavior
Router Login
User login URL http://www.routerlogin.net or
http://www.routerlongin.com
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet Connection
WAN MAC address Use default address
WAN MTU size 1492
Port speed Autosensing
Local Network (LAN)
Lan IP 192.168.0.1
Subnet mask 255.255.255.0
RIP direction None
RIP version Disabled
RIP authentication None
DHCP server Enabled
DHCP starting IP address 192.168.0.2
Specification Description