Filter
Top Products
DG834N RangeMax NEXT Wireless ADSL2+ Modem Router Reference Manual
Protecting Your Network 3-11
v1.0, October 2008
• Action. Choose how you want this type of traffic to be handled. You can block or allow
always, or you can block or allow according to the schedule you have defined in the Services
screen:
– ALLOW always. Traffic for the selected service is always allowed.
– ALLOW by schedule, otherwise Block. Traffic for the selected service is allowed
according to how the service is defined in the Services screen, but otherwise blocked.
– BLOCK always. Traffic for the selected service is always blocked.
– BLOCK by schedule, otherwise Allow. Traffic for the selected service is blocked
according to how the service is defined in the Services screen, but otherwise allowed.
• LA Users. These settings determine which packets are covered by the rule, based on their
source LAN IP address. Select the option that you want:
– Any. All IP addresses are covered by this rule.
– Single address. Enter the required start address in the Start field.
– Address range. If this option is selected, you must enter the start and finish addresses in
the Start and Finish fields.
• WA Users. These settings determine which packets are covered by the rule, based on their
destination WAN IP address. Select the option that you want:
– Any. All IP addresses are covered by this rule.
– Single address. Enter the required start address in the Start field.
– Address range. If this option is selected, you must enter the start and finish addresses in
the Start and Finish fields.
• Log. You can select whether the traffic will be logged. The choices are:
– ever. No log entries will be made for this service.
– Always. Any traffic for this service type will be logged.
– Match. Traffic of this type that matches the settings and action will be logged.
– ot match. Traffic of this type that does not match the settings and action will be logged.