Filter
Top Products
NETGEAR ProSafe 802.11g Wireless Access Point WG102 Reference Manual
1-2 Basic Installation and Configuration
v1.0, July 2008
• Support Registration card.
Contact your reseller or customer support in your area if there are any missing or damaged parts.
See the Support Information Card for the telephone number of customer support in your area. You
should keep the Support Information card, along with the original packing materials, and use the
packing materials to repack the WG102 if you need to return it for repair. To qualify for product
updates and product warranty registrations, we encourage you to register on the NETGEAR Web
site at:
http://www.NETGEAR.com.
Hardware Description
The NETGEAR WG102 ProSafe 802.11g Wireless Access Point front and rear hardware functions
are described below.
Front Panel
Viewed from left to right, the WG102 has these four status LEDs: PWR, TEST, LAN, and WLAN.
Figure 1-1
LED Description
PWR Power Indicator
Off No power. If this LED does not come on with the power adapter and
cord correctly installed, see Chapter 5, “Troubleshooting.
On Power is on.
TEST Self Test Indicator
Blink Indicates self test, loading software, or system fault (if continues).
Note: This LED may blink for a minute before going off.