Filter
Top Products
NETGEAR ProSafe 802.11g Wireless Access Point WG102 Reference Manual
1-10 Basic Installation and Configuration
v1.0, July 2008
A login window opens.
3. Log in using the default user name of admin and default password of password.
Once you have entered your access point name, the Web browser finds the WG102 Access
Point and displays the main menu as shown in
Figure 1-3 on page 1-6.
Basic IP Settings
To configure the basic settings of your wireless access point, select Basic Settings in the Setup
section of the WG102 Access Point main menu. The Basic Settings screen displays:
The default values for Basic Settings work for most users and situations. They are described
below:
• Access Point Name. This unique name is the access point NetBIOS name. The default Access
Point Name is on the bottom label of the WG102. You can modify the default name with a
unique name up to 15 characters long. The default is netgearxxxxxx, where xxxxxxx
represents the last six digits of the WG102 MAC address.
Figure 1-7