Filter
Top Products
NETGEAR ProSafe 802.11g Wireless Access Point WG102 Reference Manual
3-2 Management
v1.0, July 2008
Table 3-1. General Information Fields
Field Description
Access Point Information
Access Point Name
(NetBIOS name)
The default name may be changed if desired.
Country/Region The domain or region for which the wireless access point is licensed for
use. It may not be legal to operate this wireless access point in a region
other than one of those identified in this field.
Firmware Version The version of the firmware currently installed.
Access Point Mode The operating mode of the WG102: Access Point, Point-to-point bridge,
Multi-point bridge or Repeater.
VLAN (802.1Q) Indicates if VLAN support is enabled. The default is disabled.
Management VLAN ID Displays the VLAN ID.
Current IP Settings
IP Address The IP address of the wireless access point.
Subnet Mask The subnet mask for the wireless access point.
Default Gateway The default gateway for the wireless access point communication.
DHCP Client If this is enabled, the current IP address was obtained from a DHCP
server on your network. Disabled indicates a static IP configuration.
MAC Address The Media Access Control address (MAC address) of the wireless
access point’s Ethernet port.
Current Wireless Settings
Channel/Frequency The channel the wireless port uses. The default channel setting is
automatic channel selection. For the frequencies used on each
channel, see the link to the online document
“Wireless
Communications” in Appendix B.”
Security Profiles For each Security Profile, the following are displayed: Profile name,
SSID, security option, VLAN ID, and enabled/disabled.