Filter
Top Products
NETGEAR ProSafe 802.11g Wireless Access Point WG102 Reference Manual
Configuring Security 2-9
v1.0, July 2008
3. Set the Network Authentication that you want to use.
a. On the Security menu, click Security Profiles Settings.
b. Select the profile that you want.
c. Click Edit to view the Security Profiles Configuration menu.
d. Choose the type of Network Authentication that you want from the list.
e. Click Apply to save your settings.
Figure 2-4
Note: WEP can be used with Open System or Shared Key. Choose the
encryption strength, and then enter the Keys as explained in
“Entering
WEP Data Encryption Keys” on page 2-10
Note: If you use a wireless computer to configure WEP settings, you will be
disconnected when you click Apply. Reconfigure your wireless adapter to
match the new settings or access the wireless access point from a wired
computer to make any further changes.