Filter
Top Products
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH
16
When a standard user powers up the system a security screen may appear as setup by the administrator. The user will
need to login to the system by following the instructions below for the USER LOGIN. If the user does not know the appropriate
user name and password (setup by the administrator), contact the system administrator for this information. Once logged-in a
user can follow the Command Functions described on page 18 to control the system of CPUs within the limitations as set by the
administrator.
User Login Mode
User Login Mode requires a user to login with a user name and password from the list created by the administrator. Access to
the functions of the NODEMUX will not be allowed until a user has logged in.
Function: Keystroke:
Adds a character to the
user name/password
Removes previous character
from the user name/password
Submit user name/password
Exit User Login Mode and return
to previous mode. This function
is only available if security is
not currently active.
Additional Modes Available With Security
NOTE: The three modes that follow are only available if the administrator is logged in.
Administration Mode
Administration Mode allows the administrator to use the following functions:
Function: Keystroke:
Configure switch- for application
and RS232 communication
(not found in legacy NODEMUX)
Change the administrator’s
password
Enter User Name List Mode
Disable security
Figure 18- Administration Mode menu
Selects the idle time in seconds
Exit Administration Mode and
return to previous mode
Esc
Enter
A-Z
0-9
(Type any alphabetical or numeric character)
Backspace
Esc
T
-
-
(xxx from 000 to 255. ie. t002
would set the time-out period
for 2 seconds. 000 will disable it)
-
(0-2)
x
(0-9)
x
(0-9)
x
S
C
U
If the password submitted is incorrect, the user will not be
able to proceed.
If the password submitted is correct, the user will proceed
to the maintenance menu for additional feature options.
W