NTI NODEMUX SERIES UNIVERSAL KVM SWITCH
2
MATERIALS
Materials Supplied:
• NTI ST-xU UNIVERSAL KVM Switch
• IEC Line cord, country specific
• CD with a pdf file of this manual
Materials Not Supplied, but REQUIRED:
• A set of 2 cables for each CPU being connected to the switch:
• PS/2 CPU to Switch
- VEXT-xx-MM for video interface
- VKTINT-xx-MM for keyboard and mouse interface
OR
• SUN CPU to Switch
- VEXT-xx-MM for video interface
- 13W3M-15HDF (adapter for 13W3 to 15HD)
- SKTINT-xx-MM for keyboard/mouse interface
OR
• MAC CPU to Switch
- VEXT-xx-MM for video interface
- 15DM-15HDF (adapter for 15D to 15HD)
- MKTINT-xx-MM for keyboard/mouse interface
• One of the following cables must be used to connect the input devices (keyboard and mouse):
• PS/2 keyboard & mouse
- VKTINT-1
OR
• SUN keyboard/mouse
None needed. SUN keyboard plugs directly in.
OR
• MAC keyboard/mouse
- MKTINT-1
• OPTIONAL:
• REXT-SR-xx
- RMT Extension cable -for cascading switches- legacy-to-legacy
• REXT-SR15-xx
- RMT Extension cable- for cascading switches- legacy-to-current
• REXT-SR45-xx
- RMT Extension cable- for cascading switches- current-to-current
Where:
xx is the length of the cable in feet.
MM indicates male-to-male connector, and
FYI : "legacy" switches have hardware-based keyboard, mouse, and RS232 configuration
"current" switches have software-based keyboard, mouse, and RS232 configuration
Cables can be purchased from Network Technologies Inc by calling 800-RGB-TECH (800-742-8324) or (330)-562-
7070.