Filter
Top Products
NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH
32
4. USING THE TERMINAL
4.1 How To Setup The TERMINAL
The TERMINAL is compatible with most CPUs and application packages. A menu driven setup system is provided to select and
save the settings required by the CPU and application. To control the CPU, or in this case the SERIMUX, a user must be
familiar with the requirements of the SERIMUX in order to setup the TERMINAL.
4.1.1 Entering TERMINAL Setup
Hold down the <ALT> key and then depress the <Esc> key to enter Setup mode. When entering Setup, any text on the screen
temporarily disappears, and the main SETUP directory appears (See Figure 25). When leaving the Setup mode, the main SETUP
directory disappears, and any text that was on the screen will reappear.
4.1.2 Saving and Exiting Setup
The first menu seen when entering Setup serves as a directory to the other Setup menus. To exit Setup or any submenu, press
<F12>. Pressing <F12> will return the display to the main Setup directory and with another press of <F12> the user will exit
Setup.
The highlighted field at the right of the screen gives the user the choice of saving or not saving parameter changes into
memory before returning the terminal to the normal operating mode. Settings changed will effect the operating environment until
the TERMINAL is powered-down. Setting changes will only be restored at power-up if they are saved before exiting Setup.
NOTE: If settings are not saved before exiting Setup, any new selections will be lost when the RACKMUX is powered-
down.
To save Setup selections
, depress the Spacebar to change the save field at the right side of the screen from NO to YES before
exiting Setup. (Table 3 describes your options for exiting Setup.)
Depress <F12> to leave Setup and return to the normal display mode.
Table 3- Main Setup Menu (F12) Exit Functions
Option Function
No Returns terminal to normal operating mode without saving parameters changes for power up
Yes
Saves all changes (operating parameter, tabs, key definition, and answerback message); returns terminal
To its normal operating mode.
Shift + Esc
Restores all setting (operating parameters, tabs, key definitions, and answerback message) to their factory
default values.
4.1.3 Setup Directory
The fields at the bottom of the screen show the various setup menus where the terminal's operating parameters can be changed
and the function key to press to immediately display any menu.
Figure 25- Fields in the Setup menu display which function keys to press for submenus