Filter
Top Products
NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH
40
4.3 Local Keyboard Commands
Table 7 lists local keyboard commands in the terminal's native mode.
Table 7- Local Keyboard Commands in Native Mode
Key Sequence by keyboard Style
Command Enhanced PC
Toggle CAPS LOCK on/off CAPS LOCK
Toggle NUM LOCK on/off NUM LOCK
Put terminal in SETUP mode ALT ESC
Partially reset terminal, including communication unlock
keyboard, turn off all print modes
ALT PAUSE
Send break
*1
BREAK
*2
Toggle between block and full-duplex modes SHIFT BREAK
Print Screen formatted PRINT SCREEN
Turn auxiliary print mode on/off
SHIFT SYS REQ
*3
Turn monitor mode on/off CTRL SHIFT 1 (kpd)
Turn status line display on/off CTRL
Speed scrolling rate CTRL SHIFT
Slow scrolling rate CTRL SHIFT
Home cursor and clear page CTRL SHIFT HOME
Display page 0 CTRL 0kpd
Display page 1 CTRL 1kpd
Display next page (or active other window)
*4
PAGE DOWN
Display previous page (or active other window)
*5
PAGE UP
Toggle between split screen
*5
and full screen format CTRL SHIFT –kpd
Toggle Session 0
*6
ALT F1
Toggle Session 1
*6
ALT F2
Toggle Session 2
*6
ALT F3
Toggle Session 3
*6
ALT F4
Toggle Session 4
*6
ALT F5
Toggle Session 5
*6
ALT F6
Toggle Session 6
*6
ALT F7
Toggle Session 7
*6
ALT F8
Toggle Session 8
*6
ALT F9
Toggle Session 9
*6
ALT F10
Toggle Session A
*6
ALT F11
Toggle Session B
*6
ALT F12
Close the active Session by Local Terminal
*6
CTRL SHIFT. Kpd
*1. To MODEM port only when configured as data port: has no effect on AUX port.
*2. [BREAK] = [PAUSE] pressed together with [CTRL].
*3. [SYS REQ] = [PRINT SCREEN] pressed together with [CTRL].
*4. If screen is split.
*5. Splits screen at line 12.
*6. Only active at Ethernet mode ON.