Filter
Top Products
NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH
54
------------------------------------------------------------------------------------------------------------------------------------------------------
Table 9- Supported VT100, VT220 and Console ANSI Commands, Cont'd
------------------------------------------------------------------------------------------------------------------------------------------------------
final Final character final Final character
A Designating UK ANSI character set < Designating DEC supplemental(VT220 only)
B Designating ASCII character set DSCS
* Designating Down-line loadable character set
0 Designating DEC special graphics
* DSCS can consist of zero, one or two intermediate character and a final character. Intermediate characters are
in the range of 2/0 to 2/15. Final characters are in the range of 3/0 to 7/14
Command
----------------------------------------------------------------------
FUNCTION VT100, VT220 Console ANSI
------------------------------------------------------------------------------------------------------------------------------------------------------
Load G0 character set into GL CTRL O Same
Load G1 character set into GL CTRL N Same
Load G1 character set into GR ESC ~ Same
Load G2 character set into GL ESC n Same
Load G2 character set into GR ESC } Same
Load G3 character set into GL ESC o Same
Load G3 character set into GR ESC | Same
Shift G2 character set into GL for one character only ESC N Same
Shift G3 character set into GL for one character only ESC O Same
------------------------------------------------------------------------------------------------------------------------------------------------------
Controlling Character, Field, and Line Attributes
Define character attributes
*3
CSI Ps m Same
Ps Character Attribute Ps Character Attribute
0 Normal (all attributes off) 25 Blink off
1 Bold (blank off) 27 Reverse off
4 Underline 28 Blank off
5 Blink 30 Black character
7 Reverse 31 Red character
8 Blank (bold off) 32 Green character
22 Normal intensity 33 Brown character (Bold on = Yellow)
24 Underline off 34 Blue character
------------------------------------------------------------------------------------------------------------------------------------------------------
Command
----------------------------------------------------------------------
FUNCTION VT100, VT220 Console ANSI
------------------------------------------------------------------------------------------------------------------------------------------------------
Ps Character Attribute Ps Character Attribute
35 Magenta character 43 Brown background (Bold on = Yellow)
36 Cyan character 44 Blue background
37 White character 45 Magenta background
40 Black background 46 Cyan background
41 Red background 47 White background
42 Green background
Select Graphic Rendition (Console ANSI mode only) CSI ps m
ps Function
10 Select Primary Font
11 Select First Altemate Font. Allows ASCII characters less than 32 to be displayed as ROM character.
12 Select Second Alternate Font. Toggles high bit of extended ASCII code before displaying as ROM character.
Set bold background bit ESC[ =PnE same
Pn = 0: set bit 7 of attribute byte as B/G intensity
1: set bit 7 of attribute byte as B/G blink
Set normal foreground color ESC[ = Psn F same
Set normal background color ESC[ = Psn G same
Set reverse foreground color ESC[ = Psn H same
Set reverse background color ESC[ = Psn I same
Set graphic foreground color ESC[ = Psn J same
Set graphic background color ESC[ = Psn K same
Set border color ESC[ = Psn A same