Filter
Top Products
NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH
41
4.4 TERMINAL Command Guide
4.4.1 Commands Supported in ASCII Personalities
Table 8 lists all the ASCII commands recognized by the terminal. The native mode code for the command is given in the second
column. (The native mode includes WY-325,WY-120 and WY-60.) The remaining columns show the support for the command in
other ASCII personalities according to the following notations:
Same
Same as native code (code is native to other terminal also)
Wyse
Same as native code (Wyse enhancement- code not native to other terminal)
ENH
Same as native code when enhance mode is ON (Wyse enhancement - code not native to other terminal) A code listed under a
nonnative personality indicates that the related terminal's native code is supported.
A blank in any column indicates that the command is not supported.
Variables are shown in italics. Their values are listed in alphabetical order at the end of the table.
Footnotes are found at the end of Table 8 on page 46.
Table 8- Commands Supported in ASCII Personalities
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Command
------------------------------------------------------------------------------------------------------------
Native Wyse ADDS TVI PC
FUNCTION Mode WY-50+ VP A2 910+/925 Term
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Monitor Mode
Monitor mode on ESC U Same Same Same
Monitor mode off ESC u Same Same Same
or ESC X Same
------------------------------------------------------------------------------------------------------------------------------------------------------------
Selecting Personalities
Enhance mode off ESC ~ SPACE Same ENH ENH ESC v SPACE
Enhance mode on ESC ~ ! Same ENH ENH ESC v !
Select WY-50+ mode ESC ~" Same ENH Wyse ESC v "
Select TVI 910+ mode ESC ~ # Same ENH Wyse ESC v #
Select TVI 925 mode ESC ~ $ Same ENH Wyse ESC v $
Select ADDS VP A2 mode ESC ~ % Same ENH Wyse ESC v %
Select Console ANSI mode ESC ~ A Same ENH Wyse ESC v A
Select Native mode ESC ~ 4 Same ENH Wyse ESC v 4
Select PC Term mode ESC ~ 5 Same ENH Wyse ESC v 5
Select VT52 mode ESC ~ 6 Same ENH Wyse ESC v 6
Select VT100 mode ESC ~ ; Same ENH Wyse ESC v ;
Select PCGAPHIC mode
*1
ESC ~ I Same ENH Wyse ESC v I
Select VT220-7 mode ESC ~ < Same ENH Wyse ESC v <
Select VT220-8 mode ESC ~ = Same ENH Wyse ESC v =
Select WY-325 mode
*3
ESC ~ B Same ENH Wyse ESC v B
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Communicating with the computer
Enable transmission CTRL Q Same Same Same Same
Stop transmission Disconnect CTRL S Same Same Same Same
Send ACK (if ACK mode on) CTRL E Same Wyse Same
---------------------------------------------------------------------------------------------------------------------------------------------------------------