Filter
Top Products
DDR3THIN-MN-XXX 14 Doc. Rev. 1.11
TLA Slave1
Connect the NEX-PRB2X-T A3/2 & A1/0 probe head to DDR3 Interposer’s LEASH
that is attached to “S_ A3/2 A1/0” position on the Interposer.
Connect the NEX-PRB2X-T “C3/2” & “E3/2” probe head to DDR3 Interposer’s LEASH
that is attached to “S_C3/2 E3/2” position on the Interposer.
TLA Slave2
Connect the NEX-PRB1X-T A3/2 D3/2 probe head to DDR3 Interposer’s LEASH that is
attached to “M_A3/2 A1/0” position on the second Interposer.
Connect the NEX-PRB1X-T A1/0 D1/0 probe head to DDR3 Interposer’s LEASH that is
attached to “S_A3/2 A1/0” position on the second Interposer.
Connect the NEX-PRB1X-T “C” probe head to DDR3 Interposer’s LEASH that is
attached to “M_C3/2 C1/0” position on the second Interposer.
Connect the NEX-PRB1X-T “E” probe head to DDR3 Interposer’s LEASH that is
attached to “S_C3/2 E3/2” position on the second Interposer.
See Figure 1 for connections. Table 3 shows the Channel Grouping / Wiring for use with the
B_DDR3D_3A support.