Nexus 21 DDR3 800 Computer Hardware User Manual


 
DDR3THIN-MN-XXX 3 Doc. Rev. 1.11
License Agreement
In return for payment for this product, Nexus Technology grants the Customer a SINGLE user
LICENSE in the software subject to the following:
Use of the Software:
- Customer may use the software on only one Tektronix mainframe logic analysis system at
any given time
- Customer may make copies or adaptations of the software (see Copies and Adaptations below
for more information)
- Customer may NOT reverse assemble or decompile the software
Copies and Adaptations:
- Are allowed for archival purpose only
- When copying for adaptation is an essential step in the use of the software with the logic
analyzer and/or logic analysis mainframe so long as the copies and adaptations are used in no
other manner. Customer has no right to copy software unless it acquires an appropriate
license to reproduce from Nexus Technology.
- Customer agrees that it does not have any title or ownership of the software, other than the
physical media.
Ownership:
- Customer acknowledges and agrees that the software is copyrighted and protected under the
copyright laws.
- Transfer of the right of ownership shall only be done with the consent of Nexus Technology.
Sublicensing and Distribution:
- Customer may not sublicense the software or distribute copies of the software to the public in
physical media or by electronic means or any other means without the prior written consent
of Nexus Technology.
Compliance with WEEE and RoHS Directives
This product is subject to European Union regulations on Waste Electrical and Electronics
Equipment. Return to Nexus Technology for recycle at end of life. Costs associated with the
return to Nexus Technology are the responsibility of the sender.