Filter
Top Products
42
Manager Console
To communicate with a manager console, the Wireless Gateway must know
the manager console's IP address. If you have set up a manager console, click
in the IP Address box and type the address in.
If no manager console exists, make sure the manager console IP Address
control is set to 0.0.0.0 (this is the default setting). Any other setting will cause
the Wireless Gateway to attempt to contact the manager console at regular
intervals, adding unnecessarily to the network load.
A manager console can be networked to the Wireless Gateway through the
wired LAN, or the wireless access point. Since some manager console features
need quick response times to work well, however, it is best for any manager
console to be on the local LAN.
Log and Filter
The Wireless Gateway can send information about network activity to the
manager console. Manager Server can keep a log of this information; it can
also inspect the information as it is received and instruct the Wireless Gateway