Filter
Top Products
Nokia M10 User’s Manual
DRAFT
E Copyright Nokia Telecommunications Oy
NTC C33539002SE_A0
5-80
Command Enable/disable LCP echoing
Description Specifies whether you want your Nokia M10 to send
LCP echo requests on the specified ATM channel.
Syntax set ppp module {vccx} lcp-echo-requests [on|off]
Arguments The first argument identifies the ATM channel (vccx, x
= 1 ... 8). The second argument enables/disables LCP
echoing. You must turn off LCP echoing if you do not
want the M10 to drop a PPP link to a nonresponsive
peer.
Example m10> set ppp module vcc2 lcp-echo-re-
quests off
Command Set Configure-NAK failure maximum
Description Specifies the maximum number of Configure-NAK
messages the PPP module can send without having
sent a Configure-ACK message requests on the speci-
fied ATM channel.
Syntax set ppp module {vccx} failures-max [integer]
Arguments The first argument identifies the ATM channel (vccx, x
= 1 ... 8).
The integer argument can be any number
between 1 and 20.
Example set ppp module vcc2 failures-max 10
Command Set unacknowledged configuration request maxi-
mum
Description Specifies the maximum number of unacknowledged
configuration requests that your Nokia M10 will send to
the specified ATM channel.
Syntax set ppp module {vccx} configure-max [integer]
Arguments The first argument identifies the ATM channel (vccx, x =
1 ... 8). The integer argument can be any number
between 1 and 10.
Example set ppp module vcc2 configure-max 10