Filter
Top Products
Nokia M10 User’s Manual
DRAFT
E Copyright Nokia Telecommunications Oy
NTC C33539002SE_A0
5-88
Command Set external protocol port number range for WAN
Description Sets the the external protocol port number range.
Syntax set pinhole item [entry_number] external-port-start
[port_number] external-port-end [port_number]
Arguments The entry_number argument defines the unique pin-
hole entry number. The sequential values starting from
0 are accepted. The port_number argument defines
the start and end of the external port range. Valid va-
lues are 0 – 65535.
Example m10> set pinhole item 1 external-port-
start 80 external-port-end 80
Command Set protocol
Description Configures the protocol.
Syntax set pinhole item [entry_number] protocol [protocol]
Arguments The entry_number argument defines the unique pin-
hole entry number. The sequential values starting from
0 are accepted. The protocol argument defines the
protocol. Protocols are TCP, UDP, ICMP, PPTP.
Example m10> set pinhole item 1 protocol tcp
Command Set server IP address in LAN
Description Configures the server IP address where the protocol
defined by the external port number is mapped in LAN
port.
Syntax set pinhole item [entry_number] internal-ip [ip_address]
Arguments The entry_number argument defines the unique pin-
hole entry number. The sequential values starting from
0 are accepted. The ip_address argument is the IP
address of the server.
Example m10> set pinhole item 1 internal-ip
192.168.1.80