Filter
Top Products
Software Installation
206379-A
3-25
To set specific driver parameters:
1.
From the Board B21LAN10_ 1 (Driver B21LAN10) Actions menu, select
“Select/Modify driver parameters and protocols.”
2.
Press Enter.
The default protocol is IPX. You can also select TCP/IP or AppleTalk.
3.
Select a protocol from the available options.
4.
Specify the slot number (slot #).
5.
Select “Save parameter and load select driver.”
If you select the IPX protocol, the network number (network #) is randomly
generated.
6.
Press Enter at each of the following four prompts:
• 802.3
• 802.2
•SNAP
• Ethernet II