Filter
Top Products
Novell NetWare Reference Information
206379-A
B-3
Sample
AUTOEXEC.NCF
File Parameters
This section describes the AUTOEXEC.NCF file parameters SLOT, FRAME,
NODE, and Medium.
SLOT Parameter
The SLOT parameter specifies which adapter is enabled when multiple BayStack
21 PCI Network Cards are installed in your workstation. The SLOT keyword is an
index value corresponding to PCI BIOS. The mapping from the SLOT parameter
to the physical PCI slot is different from one workstation to another.
The following are examples of typical SLOT parameters:
LOAD C:B21LAN10 SLOT=3 FRAME=ETHERNET_802.2
LOAD C:B21LAN10 SLOT=4 FRAME=ETHERNET_II
FRAME Parameter
The FRAME parameter specifies which type of frame is used by the BayStack 21
network driver.
Accepted values include:
• Ethernet_802.3
• Ethernet_802.2
• Ethernet_II
• Ethernet_SNAP
Multiple frame types can be enabled by loading the same driver with different
FRAME type parameters.
The following are examples of typical SLOT parameters:
LOAD C:B21LAN10 FRAME=ETHERNET_802.2
LOAD C:B21LAN10 FRAME=ETHERNET_802.3
LOAD C:B21LAN10 FRAME=ETHERNET_II
LOAD C:B21LAN10 FRAME=ETHERNET_SNAP