Filter
Top Products
Page 20 of 46 Install ISDN BRI hardware
553-3901-200 Standard 7.00 January 2002
Figure 4
Module cover locking latches
Install the MISP
Once covers have been removed and card slot locations selected for ISDN
BRI cards, install the MISP cards.
1 Hold the MISP by its card-locking devices. Squeeze the tabs to unlatch
the card-locking devices and lift the tabs out and away from the card.
2 Insert the MISP into the selected card slot of the module so it engages
the card guides in the module.
3 Slide the MISP into the module until it engages the backplane
connector.
4 Push the MISP firmly into the connector using the locking devices as
levers by pushing them toward the card's front panel.
5 Push the tabs firmly against the front panel of the card so they latch to
the front lip in the module and to the post on the card.
Turn to unlock
Slide to
unlatch cover
553
-
5458
Lock screw
S
liding Latch Knob
Turn to unlock
Slide to
unlatch cover
Meridian 1
553-7695