Filter
Top Products
29
Starting Device Manager
This chapter describes the basic procedures for starting the Device
Manager.
Navigation
•
"Setting the IP address" (page 29)
•
"Starting Device Manager using Windows and UNIX" (page 29)
•
"Setting the Device Manager properties" (page 31)
•
"Opening a device" (page 36)
Setting the IP address
Before you can manage a switch or service unit using Device Manager, you
must set an IP address using the Command Line Interface (CLI):
• For information on setting the Metro Ethernet Routing Switch 8600 IP
address, see Nortel Metro Ethernet Routing Switch 8600 Commissioning
(NN46220-309).
•
For information on setting the ESU 1800 or 1850 IP address, see
Nortel Metro Ethernet Services Unit 1800 and 1850 Commissioning
(NN46212-303).
Starting Device Manager using Windows and UNIX
To start Device Manager, do one of the following:
• In the Windows environment, from the Windows Start menu, choose
Programs > Nortel > Java Device Manager > DM.
•
In a UNIX environment, verify that the Device Manager installation
directory is in your search path, then type:
JDM
An abbreviated Device Manager window opens, as shown in "Abbreviated
Device Manager window" (page 30).
Nortel Metro Ethernet Routing Switch 8600
Fundamentals — Using Device Manager
NN46225-300 02.02 Standard
4.2 1 October 2007
Copyright © 2005-2007, Nortel Networks
.