Filter
Top Products
Setting the Device Manager properties 35
OR
If you do not have a device open, from the Device Manager menu
bar, choose Device > Properties > Devices. Select the device IP
address in the Properties Device List box, and then click Edit.
The properties dialog box for the selected device opens (see the
following figure).
Device Properties
2
Select the properties you want to change and set their values.
For information about the device properties field descriptions, see
"Variable definitions" (page 35)
Settings that are gray are global default settings; you can only view
them.
—End—
Variable definitions
Variable Value
Retry Count If Device Manager cannot transmit
polling information at startup, the
number of times Device Manager
retransmits polling information.
Nortel Metro Ethernet Routing Switch 8600
Fundamentals — Using Device Manager
NN46225-300 02.02 Standard
4.2 1 October 2007
Copyright © 2005-2007, Nortel Networks
.