Filter
Top Products
October 2006 703t server description
703t Server Hardware Installation 29
Network requirements
Appropriate networking equipment must be available for the ELAN and the
optional CLAN if it is used.
The ELAN (and the optional CLAN if used) must be properly configured
for correct CallPilot operation. To ensure correct configuration, Nortel
recommends that you consult a network specialist.
Remote access connectivity
The RS-232 COM1 connector on the rear of the 703t server provides the
connection to an external dial-up modem. The modem allows administrators
and technical support personnel to administer the 703t server from a remote
location.
pcAnywhere is used to establish a remote access connection to the server.