Filter
Top Products
Installing the server and connecting the peripheral devices Standard 1.04
60 CallPilot
Connecting the server to the CLAN
(optional)
This section provides instructions to connect the server to the Customer
LAN (CLAN).
Note: The CLAN connection is optional. However, connection to a CLAN
is required for support of desktop and web messaging users, or
administration by means of a web-enabled PC. Make sure that your latest
antivirus programs and Nortel security updates are installed.
To connect the server to the CLAN
1 Locate the CLAN connector on the back of the server.
Note: The CLAN connector is labeled as NIC2 1GB. For the connector
location, see the diagram on page 54.
2 Connect an RJ-45 network cable from the CLAN hub to the CLAN
connector.
Note: When connecting the optional CLAN, do not power up unless your
antivirus programs and Nortel security updates are installed first.
What’s next?
Continue with “Installing the Nortel software feature dongle” on page 61.
ATTENTION
To comply with EMC requirements, a Class A hub must be
located 10 m (33 feet) away from the 703t server.