October 2006 Preinstallation requirements
703t Server Hardware Installation 35
5 Place the 703t server in the chosen location (see page 48). ❒
6 Set the DIP switches on the modem (see page 51). ❒
7 Connect the 703t server and devices as follows:
Connect the monitor, keyboard, and mouse (see page 55). ❒
Connect the modem (see page 55). ❒
Connect the 703t server to the ELAN hub (see page 58).
ATTENTION
To comply with EMC requirements, a Class A hub must be
located 10 m (33 ft.) away from the 703t server.
❒
Note: If you are connecting the optional CLAN, do not power
up unless your antivirus programs and Nortel security updates
are installed first.
Connect the 703t server to the CLAN hub (optional); (see
page 60).
ATTENTION
To comply with EMC requirements, a Class A hub must be
located 10 m (33 ft.) away from the 703t server.
❒
Install the software feature dongle (see page 61). ❒
Connect the power cords for all devices, and then power
them up (see page 63).
❒
8 Start the 703t server (see page 65). ❒
Step Description Check