Filter
Top Products
Installing the server and connecting the peripheral devices Standard 1.04
48 CallPilot
Installing the server
Before you install the 703t server, ensure that the chosen location meets the
requirements identified in the “Site inspection checklist” provided in the
Installation and Configuration Task List (555-7101-210).
To install the server
1 Place the 703t server in its chosen location.
Note: The server must be placed within 20 m (60 feet) of the Meridian 1
switch or Succession 1000 system.
Note: The DS30X cable that connects the MPB96 board
s to the MGate
cards is 20 m (60 feet) long. This allows the server to be placed in a
different room from the Meridian 1 switch or Succession 1000 system.
2 Connect peripheral devices as described in the remainder of this
chapter.