Filter
Top Products
October 2006 Preinstallation requirements
703t Server Hardware Installation 39
Removing the side cover
Introduction
This section describes how to remove the server side cover so that you can
work with the interior components. The side cover is on the server’s left side
when the front of the server is facing you.
To remove the side panel
.
WARNING
Risk of personal injury
Be careful when you handle the sharp edges of the side panel
and chassis to prevent personal injury.
.
CAUTION
Risk of equipment damage
Use an ESD wrist strap to protect static-sensitive
components.
Place the server on its side to prevent the server from
accidentally falling over. This provides greater stability. If
you attempt to work with the server in its standing position,
it may tip over when you work with the interior
components.