Nortel Networks 2700 Network Card User Manual


 
26 Chapter 1 Installing the Nortel VPN Router 2700 chassis
NN46110-311 02.01
Figure 1 shows the front view of the VPN Router 2700.
Figure 1 Front view of the VPN Router 2700
The VPN Router 2700 chassis provides the following:
one 10/100 Ethernet LAN port on the base system
one serial port for out-of-band management of the VPN Router 2700
four expansion peripheral component interconnect (PCI) slots that can contain
interface cards, VPN Accelerator cards (VPN Router Security Accelerator
card and Hardware Accelerator card), and the Secure Sockets Layer (SSL)
VPN Module 1000
one 10/100 Ethernet interface card installed in PCI slot 4
256 MB memory upgradable to 512 MB total
Preparing to install the Nortel VPN Router 2700
Before you begin the installation, verify that:
Your shipment is complete and undamaged.
You have the cables, tools, and other equipment that you need.
Your installation site meets the physical, electrical, and environmental
requirements.
The sections that follow provide information to help you prepare for installation.
CS260001B
Alert/Fail
Boot/Ready