Filter
Top Products
72 Chapter 4 Installing option cards and DIMMs
NN46110-311 02.01
Figure 26 Installing and removing a DIMM
10 Replace the top cover on the chassis (Figure 21 on page 62).
a Hold the cover at an angle, and slide it onto the chassis.
b Insert the four screws that secure the cover to the chassis, and use a
screwdriver to tighten the screws.
11 Do the following to install the VPN Router 2700 in an equipment rack:
a Set the VPN Router 2700 on the rack-mount shelf in the rack.
b Insert one of the panhead screws through the bottom hole on each side of
the shelf into the hole in the rack and tighten the screws.
To remove DIMMs, pull back
locking levers and pull out DIMM.
To install DIMMs, pull back locking
levers and push in DIMM.
Locking lever
Alignment keys