Filter
Top Products
66 Chapter 4 Installing option cards and DIMMs
NN46110-311 02.01
Table 17 provides additional guidelines for option card installation when an SSL
VPN Module 1000 is installed in slot 1.
V.90 modem interface 4 If an SSL VPN Module 1000 is in slot 1, do not
install the V.90 modem interface card in slot 2.
Single V.35/X.21 WAN interface
(full-height)
4
Single V.35/X.21 WAN interface
(half-height)
8
4
HSSI WAN interface
9
2 Do not install in slot 4; install in slot 3 or 1 if possible.
If an SSL VPN Module 1000 is installed, you can
install only one HSSI WAN interface card.
1 The VPN Router 2700 must be running Version 5.0 or later.
2 The VPN Router 2700 must be running Version 4.90 or later.
3 To support two Hardware Accelerator cards, the gateway must be running Version 4.76 or later.
4 The VPN Router 2700 must be running Version 5.05.330, 6.05.140 and later, 7.00.062, 7.05.100 and later, or 7.05.300
and later. The VPN Router 2600 supports 10/100 Mbps operation only.
5 The VPN Router 2700 must be running Version 5.0 or later.
6 The VPN Router 2700 must be running Version 4.90 or later.
7 The VPN Router 2700 must be running Version 4.80 or later.
8 The VPN Router 2700 must be running Version 4.80 or later.
9 The gateway must be running Version 4.76 or later, or the hardware revision must be at least 03.
Table 17 Installing other option cards with the SSL VPN Module 1000
Option card Restrictions with SSL VPN Module 1000 installed
VPN Router Security Accelerator Only one VPN Router Security Accelerator card can be
installed.
Hardware Accelerator You can install two cards only if none of these cards is installed:
• VPN Router Security Accelerator
• 1000BASE-T or 1000BASE-SX
• HSSI
If a 1000BASE-T (1000 MT), 1000BASE-SX, Security
Accelerator, or HSSI card is installed, only one Hardware
Accelerator card can be installed.
Table 16 Supported option cards for the 2600 and 2700
Option card
Maximum
number Restrictions