Nortel Networks 2700 Network Card User Manual


 
Chapter 2 Cabling the VPN Router and turning the power on 43
Nortel VPN Router Installation — VPN Router 2700
The following table describes the LEDs on the 1000BASE-T (1000 GT) Ethernet
interface card.
1000BASE-T (1000 MT) Ethernet interface card LEDs
Figure 12 shows the LEDs on the 1000BASE-T (1000 MT) Ethernet interface
card.
Figure 12 LEDs on the 1000BASE-T (1000 MT) Ethernet interface card
Table 8 describes the LEDs on the 1000BASE-T (1000 MT) Ethernet interface
card.
Table 7 LED indicators on the 1000BASE-T (1000 GT) Ethernet interface card
LED Indicator Description
ACT/LINK Steady green The port is connected to a valid link partner.
Flashing green The card is sending or receiving network data. The
frequency of the flashes increases with increased
traffic.
Off The card is not sending or receiving data.
10/100/1000 Yellow The port is operating at 1000 Mb/s.
Green The port is operating at 100 Mb/s.
Off The port is operating at 10 Mb/s.
Table 8 LED indicators on the 1000BASE-T (1000 MT) Ethernet interface card
LED Indicator Description
ACT/LNK Steady green The port is connected to a valid link partner.
Flashing green The LAN port is sending or receiving network data.
Off The port is not linked to a valid partner.
11287EA
10 = OFF
100 = GRN
1000 = ORG
ACT/LNK
Intel PRO
R
10/100/1000
ACT/LNK