Filter
Top Products
68 Chapter 4 Installing option cards and DIMMs
NN46110-311 02.01
6 Remove the filler panel screw, and pull out the filler panel (or the option card
that you are replacing) from the slot (Figure 24).
Figure 24 Installing and removing an option card
7 Lower the new option card into the slot, and gently press the connector into
the slot.
Seat the card firmly in the slot. If you do not seat the card properly, it does not
work.
8 Replace the screw that secures the card to the slot (Figure 24).
9 Replace the top cover on the chassis (Figure 21 on page 62).
a Hold the cover at an angle and slide it onto the chassis.
Motherboard
Option card
Filler panel screw
Rear of unit
Option card slots
CS2600017A