Nortel Networks 2700 Network Card User Manual


 
Chapter 2 Cabling the VPN Router and turning the power on 41
Nortel VPN Router Installation — VPN Router 2700
LEDs on the system 10/100BASE-TX Ethernet port
Figure 9 shows the LEDs for the 10/100BASE-TX Ethernet port located on the
rear of the VPN Router 2700.
Figure 9 LEDs on the system LAN port
Table 5 describes the LEDs on the system 10/100BASE-TX Ethernet port.
Table 5 LED indicators on the system 10/100BASE-TX Ethernet port
LED Indicator Description
Green On The LAN port is operating at 100 Mb/s.
Off The LAN port is operating at 10 Mb/s.
Yellow On The cable connections between the LAN port and the
hub are good.
Off The cable connections between the LAN port and the
hub are faulty.
Flashing The LAN port is sending or receiving network data.
The frequency of the flashes increases with
increased traffic.
CS260011A
Green
Yello
w