Filter
Top Products
Chapter 2 Cabling the VPN Router and turning the power on 37
Nortel VPN Router Installation — VPN Router 2700
Figure 7 shows the back of the VPN Router 2700. All interface cables and the
power cord attach to the rear of the gateway.
Figure 7 Rear view of the VPN Router 2700
Connect the interface cables to the VPN Router 2700 in this order:
1 Connect the 10/100BASE-TX RJ-45 cable to the built-in 10/100BASE-TX
Ethernet LAN port on the gateway (Figure 7).
2 If you plan to connect a terminal or PC to the gateway, connect the serial cable
shipped with the VPN Router 2700 to the serial port (Figure 7).
3 Connect all other cables to the ports on the installed interface cards.
If you ordered optional interface cards, connect the cables for these interfaces
to the ports.
CS260002A
100-2240VAC
2-1A
50-60Hz
Power Reset
Serial
LAN
1234