Filter
Top Products
15
R2MFC Card Installation and Configuration Guide
Preface
This guide explains how to install, configure, and maintain the Nortel R2MFC card.
The guide also provides information about the Command Line Interface (CLI) tool used to
configure, operate, administer and maintain the R2MFC card from a computer.
The document contains the following chapters:
Chapter 1, “Overview” — introduces the elements of the R2MFC card.
Chapter 2, “Preparing to install the R2MFC card” — describes the process of preparing for
R2MFC card installation.
Chapter 3, “Installing the R2MFC card” — describes the process of installing the R2MFC card
and connecting the R2MFC card to the host system.
Chapter 4, “Configuring the R2MFC card” — describes the configuration tools and the process of
configuring the R2MFC card.
Chapter 5, “R2MFC card maintenance” — describes the maintenance tools and the process of
maintaining the R2MFC card.
Chapter 6, “Command Line Interface (CLI)” — describes the Command Line Interface and the
commands used to configure, operate, administer, and maintain the R2MFC card.
Before you begin
This guide assumes the following:
• The host system is installed and initialized and is working correctly.
• The host system is running Norstar MICS 4.0, or greater. The R2MFC card is not compatible
with Norstar CICS systems. Second dial tone is available only on Norstar 6.0 or higher.
• The R2MFC card must be installed in the Norstar main chassis, the R2MFC card is not
compatible with the Norstar trunk module.
• Users have a working knowledge of the host system operations.
• All configuration installers have a working knowledge of the Windows operating system and
graphical user interfaces.
Note: The CLI is separate from the Norstar Remote Utilities (NRU) tool.