Filter
Top Products
Chapter 3 Installing the R2MFC card 33
R2MFC Card Installation and Configuration Guide
Figure 9 on page 33 provides an overview of the process for connecting trunk wiring to the Norstar
R2MFC cards.
Figure 9 Trunk wiring overview
Danger: Electrical shock hazards
Electrical shock hazards from the telecommunications network and AC mains are possible
with this equipment. To minimize risk to service personnel and users, you must connect
the Norstar system to an outlet with a third-wire ground. In addition, all unused slots must
have blank faceplates installed. The covers on all units must be in place at the completion
of any servicing.
Install R2MFC
Card
Read warnings
Determine the correct
connector to use
Connect cables to
appropriate
modules
Continue with setup
procedures