Filter
Top Products
23
R2MFC Card Installation and Configuration Guide
Chapter 2
Preparing to install the R2MFC card
This chapter provides an overview of the preparation required to install the R2MFC card in a host
system. (The host system is the Norstar system to which the R2MFC card connects.)
The information in this chapter is based on the following assumptions:
• The host system is installed, initialized, and tested.
• The installer has a working knowledge of the host system and an understanding of
telecommunications.
This chapter contains the following information:
• “Installation process map”
• “Host system setup requirements” on page 24
• “R2MFC card setup requirements” on page 24
• “Customer-supplied hardware requirements” on page 25
Installation process map
Figure 4 provides an overview of the R2MFC card installation preparation.
Figure 4 Overview of the R2MFC card installation preparation
Installation
preparation
Ensure that Norstar is
installed and configured
properly
Determine the correct
country and variant
Ensure environmental
requirements are met
Ensure that all of the
customer supplied
hardware is present
Ensure electrical
requirements are met
Ensure software
requirements are met