Filter
Top Products
Chapter 6 Command Line Interface (CLI) 71
R2MFC Card Installation and Configuration Guide
CatgOpt <mfc_link> <flag> Defines which MFC category to transmit in outgoing calls.
Where:
mfc_link is the number of the link, 0 or 1.
flag defines the MFC category (default is 0).
DefltCatgVal <mfc_link><category> Defines the MFC category value when CatgOpt is set to the default value.
Where:
mfc_link is the number of the link, 0 or 1.
category is the MFC category in the range of 1...15.
SubsIndOpt <mfc_link> <flag> Defines which subscriber status to send when an incoming MFC call
terminates successfully.
Where:
mfc_link is the number of the link, 0 or 1.
flag is the subscriber status, 0 (subscriber option is default value) or 1
(subscriber option is received value).
DefltSubsVal
<mfc_link><subscriber>
Defines the subscriber status value when the SubsIndOpt commands is set
to the default value.
Where:
mfc_link is the number of the link, 0 or 1.
subscriber can have the values of:
• 0 = speech_charge (A group)
• 1 = free_charge
• 2 = free_no_charge
• 3 = control_charge
EndDialType
<mfc_link><direction><type>
Defines how to handle MFC end of dial.
Where:
mfc_link is the number of the link, 0 or 1.
direction is 0 (IC), 1 (OG), or 2 (both).
type is either 0 (Ix signal) or 1 (fix number of digits).
SetDigitCount <mfc_link>
<count_type> <value>
Sets the number of expected digits when the EndDialType is set to a fixed
number of digits.
Where:
mfc_link is the number of the link, 0 or 1.
count_type is either 0 (minimal range) or 1 (optional range).
value has values of 3...12 for minimal range or 0...15 for optional range.
Table 22 MFC directory CLI commands (Sheet 2 of 3)
CLI command Description