Filter
Top Products
142 - C130n User’s Guide
Solving Other Problems
Symptom Cause Solution
Printer
power is not
on.
The power cord is not
correctly plugged into the
outlet.
Turn off the printer, confirm that the
power cord is correctly plugged into the
outlet, and then turn on the printer.
Something is wrong with the
outlet connected to the
printer.
Plug another electrical appliance into
the outlet and see whether it operates
properly.
The power switch is not
correctly turned on (I
position).
Turn the power switch off (O position),
then turn it back to the on (I position).
The printer is connected to
an outlet with a voltage or
frequency that does not
match the printer
specifications.
Use a power source with the
specifications listed in “Printer
Specifications” on page 169.
The control
panel
displays
“X TONER
LOW “
much sooner
than
expected.
One of the toner cartridges
may be defective.
Remove the toner cartridges and check
each for damage. If one or more is
damaged, replace it.
You printed with heavy toner
coverage.
See specifications in “Printer
Specifications” on page 169.
You can’t
print the
configuration
page.
The tray is empty. Check that at least Tray 1 is loaded
with media, in place, and secure.
There is a media
misfeed.
Clear the media misfeed.