Filter
Top Products
56 - C130n User’s Guide
Labels
CAUTION
Labels may stick to the fuser, causing them to peel off and media
misfeeds to occur.
A sheet of labels consists of a face sheet (the printing surface), adhesive, and
a carrier sheet:
" The face sheet must follow the plain paper specification.
" The face sheet surface must cover the entire carrier sheet, and no
adhesive should come through on the surface.
You can print continuously with label sheets. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Try printing your data on a sheet of plain paper first to check placement.
Check your application documentation for more information on printing labels.
Use label sheets that are
" Recommended for laser printers
Capacity Tray 1 Up to 50 label sheets, depending on their
thickness
Tray 2 Not supported
Orientation Face up
Driver
Media Type
Labels
Duplexing Not supported