Filter
Top Products
148 - C130n User’s Guide
The print or color
density is uneven.
One or more of the
toner cartridges may
be defective or low.
Remove the toner cartridges and
check for damage. If it is damaged,
replace it.
The imaging cartridge
is defective.
Remove the imaging cartridge and
check for damage. If it is damaged,
replace it.
The printer is not level. Place the printer on a flat, hard, level
surface.
Irregular print or
mottled image
appears.
The media is moist
from humidity.
Adjust the humidity in the media
storage area.
Remove the moist media and replace it
with new, dry media.
Unsupported media
(wrong size, thickness,
type, etc.) is being
used.
Use good quality recommended
media. See “Print Media” on page 53.
One or more of the
toner cartridges may
be defective.
Remove the toner cartridges and check
each for damage. If one or more is
damaged, replace it.
The imaging cartridge
is defective.
Remove the imaging cartridge and
check for damage. If it is damaged,
replace it.
There is
insufficient fusing
or the image
comes off when
rubbed.
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
Unsupported media
(wrong size, thickness,
type, etc.) is being
used.
Use good quality recommended
media. See
“Print Media” on page 53.
Media type is set
incorrectly.
When printing labels, postcards, thick
stock, or letterheads, specify the
appropriate media type in the printer
driver.
Symptom Cause Solution