Filter
Top Products
48 - C130n User’s Guide
EMULA-
TIONS
DEFAULT Settings AUTOMATIC, POSTSCRIPT, PCL5, PCL XL,
HEX DUMP
Specify the printer control language.
If AUTOMATIC is selected, the printer automatically
selects the printer control language from the data stream.
AUTO
DEFAULT
Settings PCL5, POSTSCRIPT
Select the printer description language when it cannot be
identified from the data.
POSTSCRIP
T
ERROR
PAGE
Settings ON, OFF
Select whether or not an error page is printed
when a PostScript error occurs.
PCL LINE
TERMINA
TION
Settings CR=CR LF=CRLF,
CR=CR LF=LF,
CR=CRLF LF=LF,
CR=CRLF LF=CRLF
Select the definitions of the CR/LF codes in
the PCL language.
FONT PITCH
SIZE
Settings 44-1000-9999
Specify the bitmap font size in the
PCL language.
FONT
NUMBER
Settings 0-32767
Specify the font used with the PCL
language.
The font numbers that appear
correspond to the PCL font list.
For details on printing the font list,
refer to
“PRINT MENU” on
page 32.
POINT
SIZE
Settings 400-1200-99975
Specify the outline font size in the
PCL language.
SYMBOL
SET
Specify the symbol set used with
the PCL language.
The default setting is PC8.
System Default Menu
Note All factory default values are shown in bold.